Search

Newsletter





Home > Gun Parts/ Accessories > Stock Adapters
Sort By:
Page of 2
Black Aces RB7MSS Side Shell Holder for Mossberg 500/590/590A1/Maverick 88
Black Aces RB7MSS Side Shell Holder for Mossberg 500/590/590A1/Maverick 88
Our Price: $45.00

Black Aces Tactical has just released their exclusive Side Shell Holder compatible with their Mossberg 500/590/590A1/Maverick 88 quad rail system! With a capacity of FIVE 12-gauge shells, you'll be ready to take your shotgun to the next level!

This shell holder features an ATI 5 shot grabber, a custom Black Aces Tactical back plate, and all the hardware needed to work with your quad rail. The kit ALSO includes the hardware necessary to install without the quad rail, for use on any Mossberg 500/590/590A1/Maverick 88.

Simply use the back plate in place of the port side ABS spacer, and remove/replace the OEM low profile receiver screw with the hardware provided in the kit. It's just that easy. Lightweight, and ergonomic, the Black Aces Tactical side shell holder is the natural addition to any RB7M.

Some may need to sand-down the screw head of the supplied breach screw if bolt tolerances are too tight, otherwise no gunsmitthing required and installation takes just a few minutes.

Manufactured by Black Aces Tactical. Proudly Made in America. *Firearm, ammo, and accessories pictured are not included.

Black Aces Tactical has just released their exclusive Side Shell Holder compatible with their Mossberg 500/590/590A1/Maverick 88 quad rail system! With a capacity of FIVE 12-gauge shells, you'll be ready to take your shotgun to the next level!

This shell holder features an ATI 5 shot grabber, a custom Black Aces Tactical back plate, and all the hardware needed to work with your quad rail. The kit ALSO includes the hardware necessary to install without the quad rail, for use on any Mossberg 500/590/590A1/Maverick 88.

Simply use the back plate in place of the port side ABS spacer, and remove/replace the OEM low profile receiver screw with the hardware provided in the kit. It's just that easy. Lightweight, and ergonomic, the Black Aces Tactical side shell holder is the natural addition to any RB7M.

Some may need to sand-down the screw head of the supplied breach screw if bolt tolerances are too tight, otherwise no gunsmitthing required and installation takes just a few minutes.

Manufactured by Black Aces Tactical. Proudly Made in America. *Firearm, ammo, and accessories pictured are not included.

Mesa Tactical 91250 LEO Telescoping Stock Adapter
Mesa Tactical 91250 LEO Telescoping Stock Adapter
Our Price: $65.00

The LEO adapter, manufactured for the Remington 870 and Mossberg 500/590 are the most popular models, and features a lowered stock elevation allowing the use of iron sights or even the bead sight. LEO adapters also accept optional stamped steel sling loop and hook loops. The LEO's low price and streamlined appearance make it the best choice for agencies looking for a simple, reliable telescoping stock at an affordable price.
Mesa Tactical 93170 LEO Telescoping Stock Adapter for Moss 500 (12-GA and 20-GA)
Mesa Tactical 93170 LEO Telescoping Stock Adapter for Moss 500 (12-GA and 20-GA)
Our Price: $71.00

LEO® TELESCOPING STOCK ADAPTER FOR MOSS 500 (12-GA AND 20-GA)

Our aluminum adapter kits include everything necessary to retrofit Remington or Mossberg pump shotguns with most AR-15 style stocks and pistol grips. Our adapter kits allow customers to add their own AR-15 stock assemblies as desired.

Mesa Tactical 91470 Urbino Pistol Grip Stock for Ben M4 (Riser, Limbsaver, 12-GA, Black)
Mesa Tactical 91470 Urbino Pistol Grip Stock for Ben M4 (Riser, Limbsaver, 12-GA, Black)
Our Price: $135.00

URBINO® PISTOL GRIP STOCK FOR BEN M4 (RISER, LIMBSAVER, 12-GA, BLACK)

Mesa Tactical's Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon. The rugged Urbino Tactical stock features a “tactical” 12½ inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

Black Aces RB7R Tactical Remington 870/1100 Tactical Rail
Black Aces RB7R Tactical Remington 870/1100 Tactical Rail
Our Price: $135.00

The Black Aces Tactical quad rail system features:
  • Fits Remington 870 / 1100 with extended magazine tube
  • One piece T6 6061 construction
  • Light 16 ounce weight!!
  • Type 2 black anodizing
  • Full install kit with tools is included.
Black Aces RB7930 Mossberg 930 Quad Tactical Rail Black
Black Aces RB7930 Mossberg 930 Quad Tactical Rail Black
Our Price: $135.00

This Mossberg 930-compatible rail is beautiful and entirely functional. This work of art now allows any picatinny rail accessory, such as those on your rifle, to be mounted on the Mossberg 930. Take your shotgun to the next level! No gunsmitthing required! This rail will fit both tapped and untapped receivers.

Compatible with 12ga models!

Compatible with extended magazine tubes only.

OEM heat shields should be removed as this rail replaces them. The manufacturer recommends a minimum barrel length of 18-inches. The clamp supplied with this rail is not compatible with models featuring a breach muzzle or flash hider/supressor-style muzzle.

Manufactured by Black Aces Tactical. Proudly Made in America.
Thordsen FRS-15 Featureless Enhanced Stock 4001QB
Thordsen FRS-15 Featureless Enhanced Stock 4001QB
Our Price: $135.00

Make your rifle even lighter by adding on the feather light ARFX stock from ACE. The skeletonized design eliminates excess material while taking advantage of the inherent strength of the buffer tube. Includes all necessary hardware, including sling swivel. Including recoil buffer, buffer tube or spring.
Black Aces RB7M Mossberg 500/590/Mav 88 Rail
Black Aces RB7SLIM Mossberg 500/590/Mav 88 Quad Rail
Our Price: $135.00

Mossberg 500/590/ Maverick 88 quad rail. So far as we can tell, this is the first manufactured Mossberg 500/590/590A1 quad rail produced [and what a great piece]! This Mossberg rail is the last word in quality accessorizing.
This listing is for the rail system only. The shotgun and other accessories in the photo is for demonstration only.
Fits Mossberg 500 / 590 / 590A1 / Maverick 88
No gunsmitthing required! This rail will fit both tapped and untapped receivers, both. Install time take under 10 minutes from the time the rail is removed from the box to the time the shotgun is ready to fire. We even supply the tools and instructions!
One piece T6 6061 construction
Compatible with 12ga and 20ga models!
Light 10 ounce weight!!
Black anodizing coating
Full installation kit is included.
Mesa Tactical 90630 High-tube Telescoping Stock Adapter and Rail Kit for Rem 870 (12-GA, 9 in rail)
Mesa Tactical 90630 High-tube Telescoping Stock Adapter and Rail Kit for Rem 870 (12-GA, 9 in rail)
Our Price: $141.00

These are simply the best shotgun mounted shell carriers on the market. They are machined out of 6061-T6 aluminum and feature an innovative rubber friction retention system to retain ammo reliably and withstand tough conditions and extended use.

They mount directly to the side of the shotgun receiver by substituting a steel bolt for the trigger pin retained by an acorn nut at the rear and custom steel retaining hardware at the front. They also include an adhesive-backed, die-cut rubber gasket to protect the shotgun's finish. They are also designed to not obscure the shotgun's serial number.

This part requires a tactical stock forend that does not significantly overlap the receiver or a factory forend that is cut down appropriately to allow clearance for the SureShell and ammo.

Made of 6061-T6 Aluminum, Bead blasted and mil-spec anodized for a rugged, non-glare finish.
Mesa Tactical 94710 Urbino Pistol Grip Stock for Moss 930 (Riser, Limbsaver, 12-GA, Black)
Mesa Tactical 94710 Urbino Pistol Grip Stock for Moss 930 (Riser, Limbsaver, 12-GA, Black)
Our Price: $144.00

URBINO® PISTOL GRIP STOCK FOR MOSS 930 (RISER, LIMBSAVER, 12-GA, BLACK)

Mesa Tactical's Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon. The rugged Urbino Tactical stock features a “tactical” 12½ inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.