Search

Newsletter





Home > Gun Parts/ Accessories > Triggers
Sort By:
Page of 11
Apex Tactical 100-075  Ultimate Striker Block (USB) Kit S&W M&P Pistols Stainless Steel
Apex Tactical 100-075 Ultimate Striker Block (USB) Kit S&W M&P Pistols Stainless Steel
Our Price: $34.00

The Apex Ultimate Striker Block Kit was designed to work in conjunction with the Apex Hard Sear. The geometry and dimensions of the striker safety plunger differs from the factory part to yield an exceptionally smooth take-up before the trigger bar engages the sear cam. The design also minimizes drag on the trigger bar as it transitions to the rest point. The secondary benefit is a more detectable trigger reset.

The striker safety plunger is made from heat treated 17-4 ph stainless steel for wear resistance and mirror polished for minimal drag. The kit also includes a reduced power plunger spring that maintains the necessary safety values while reducing drag and lift resistance. Also included is a rear sight tool manufacturer by Talon Tactical which simplifies installation. This kit is for use in any M&P series pistol, in any caliber, including the M&P Shield.

Apex Tactical 107-003 Action Enhancement Trigger S&W SD9, SD40 Polymer Black
Apex Tactical 107-003 Action Enhancement Trigger S&W SD9, SD40 Polymer Black
Our Price: $40.00

The Apex Polymer Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a solid body polymer trigger with a center mounted pivoting safety.  The rounded face of the trigger provides a smooth comfortable surface for the shooter’s finger while firing.  The trigger also reduces pre-travel by approximately 20% and over travel by 10% when compared to the factory trigger and is perfect for use in SD and Sigma pistols already equipped with an Apex SD or Sigma Spring Kits, but works as a standalone component as well.

Expected results:

  • Smooth face trigger with a solid body to produce a more comfortable trigger face for the shooter’s finger.
  • Reduced trigger pre-travel by 20%
  • Reduced trigger over travel by 10%
  • Reduced trigger pull weight by 10-15%

Includes trigger and slave pin for installation.

Apex Tactical 100-025  M&P Polymer Action Enhancement Trigger
Apex Tactical 100-025 M&P Polymer Action Enhancement Trigger
Our Price: $40.00

The Polymer Action Enhancement Trigger Kit from Apex Tactical directly replaces the factory hinged trigger with a solid body polymer trigger with a center mounted pivoting safety. The rounded face of the trigger provides a smooth comfortable surface for the shooter’s finger while firing. The trigger also reduces pre-travel by approximately 20% from the factory trigger.

This model fits the Smith and Wesson M&P ONLY. Not for use with M&P Shield, Sigma, or SD models.

Specifications:
  • Caliber: All
  • Material: Polymer
  • Color: Black

Apex Tactical 100-068  Failure Resistant Extractor (FRE) S&W M&P Pistols
Apex Tactical 100-068 Failure Resistant Extractor (FRE) S&W M&P Pistols
Our Price: $43.00

The Apex Failure Resistant Extractor (FRE) was designed to ensure consistent and reliable extraction under the most adverse conditions. Critical engagement surfaces and hook geometry are machined by wire EDM. The result is tolerance variation that is an order of magnitude smaller than using conventional machining techniques.

Technical Information:

  • For use in any M&P series pistol however minimal fitting may be required for the .45 configuration
  • Not Compatible with M&P Shield Models

Timney Sear and Sear Spring Ruger 77/17, 77/22 , 77/44, 77/50 2-1/2 lb
Timney 7722 Sear and Sear Spring Ruger 77/17, 77/22 , 77/44, 77/50 2-1/2 lb
Our Price: $47.95

This sear and spring kit will make an amazing difference in the feel of your rifle's trigger. You'll have a clean break of around 1.5 - 2 pounds. Takes a few minutes to fit the sear to the rifle and you may have to do a bit of filing. Fits the Ruger 77/22, 77/17, 77/40 and 77/50.

ZEV TECHNOLOGIES  Ultimate Trigger Parts Kit, 9mm PK-ULT-9
ZEV TECHNOLOGIES Ultimate Trigger Parts Kit, 9mm PK-ULT-9
Our Price: $50.00

Part: PK-ULT-9

Manufacturer: ZEV TechnologiesWeight: 0.03OZ. This 9mm parts kit works best when a ZEV Fulcrum Ultimate Trigger Kit and ZEV slide are purchased to make a complete functional upper and trigger assembly.


Kit Includes:


Factory components;

Channel liner, Striker sleeve, Spring cups, Extractor, Rod & bearing assembly


ZEV components;

ZEV Backplate

Timney 1001 Low Profile Safety for Mausers M-98
Timney 1001 Low Profile Safety for Mausers M-98
Our Price: $50.95

Fits in the back of Mauser bolt shroud and allows the use of a low-mounted scope. Rotates from "on" to "off" position in approximately 70 degrees. This is a remake of the famous "Buehler" style safety. Will likely require minor gunsmithing for proper function.
Timney Trigger Low Profile Safety for Mausers M-95-6 LPS #1002 Mauser Safety
Timney Trigger Low Profile Safety for Mausers M-95-6 LPS #1002 Mauser Safety
Our Price: $50.95

Fits in the back of Mauser bolt shroud and allows the use of a low-mounted scope. Rotates from "on" to "off" position in approximately 70 degrees. This is a remake of the famous "Buehler" style safety. Will likely require minor gunsmithing for proper function.
Timney 101 Sportsman Trigger for '98 Mauser
Timney 101 Sportsman Trigger for '98 Mauser
List Price: $125.00
Our Price: $72.95
Savings: $52.05


Timney Sportsman Triggers feature a lightweight alloy housing and hardened steel working surfaces. They are lightweight, rugged and durable. The trigger pull is adjustable from 2 to 4 lbs and is adjustable for creep, backlash and overtravel. This trigger requires the use of the original safety. Minor fitting may be required. Fits all large and small ring Mausers including the Husqvarna, Interarms Mark X. Will not fit Swedish Mausers and carbine actions with "KAR 98" on the siderails. Will fit the Yugo M48 however stock inletting is required.
Timney Trigger 102 Mauser Sportsman SP M98K Mauser 98K Adjustable 2-4 lbs
Timney Trigger 102 Mauser Sportsman SP M98K Mauser 98K Adjustable 2-4 lbs
List Price: $125.00
Our Price: $72.95
Savings: $52.05


Timney Sportsman Triggers feature a lightweight alloy housing and hardened steel working surfaces. They are lightweight, rugged and durable. The trigger pull is adjustable from 2 to 4 lbs and is adjustable for creep, backlash and overtravel. This trigger requires the use of the original safety. Minor fitting may be required. Fits all large and small ring Mausers including the Husqvarna, Interarms Mark X. Will not fit Swedish Mausers and carbine actions with "KAR 98" on the siderails. Will fit the Yugo M48 however stock inletting is required.